2010 Port Arthur oil spill
| Port Arthur oil spill | |
|---|---|
|
250px A barge embedded in the bow of Eagle Otome | |
| Location | Sabine-Neches Waterway at Port Arthur, Texas |
| Coordinates |
29°51′42″N 93°56′12″W / 29.861611°N 93.9366°WCoordinates: 29°51′42″N 93°56′12″W / 29.861611°N 93.9366°W{{#coordinates:29.861611|-93.9366|region:US-TX_type:landmark|||||| |primary |name= }} |
| Date | January 23, 2010 |
| Cause | |
| Cause | Collision between oil tanker Eagle Otome and a barge |
| Operator | AET Incorporated |
| Spill characteristics | |
| Volume | 1,000 to 11,000 barrels |
The 2010 Port Arthur oil spill was the result of a collision between two vessels in the Sabine-Neches Waterway at Port Arthur, Texas on January 23, 2010. The two vessels were the oil tanker Eagle Otome and a barge being pushed by the towboat Dixie Vengeance.[1]
Collision
The barge collided with the tanker at about 09:30 local time on January 23, 2010,[2] in the Sabine-Neches Waterway[3] as the tanker, chartered by Exxon-Mobil from AET Incorporated to move oil to Exxon's refinery in Beaumont, Texas, moved upstream, and the barge was being maneuvered out of the harbor.[4] The collision tore a 15 × 8 foot hole in the side of the tanker[2], through which as much as 450,000 gallons, or 1,500 tonnes, of crude oil, escaped. According to statements from the tanker's crew, the tank that was damaged contained 80,000 barrels of oil, of which 69,000 had been transferred to another tank, leaving 11,000 barrels, or 450,000 gallons unaccounted for. According to local officials, however, there did not appear to be that much oil in the water, and some said that as little as a thousand barrels, or 42,000 gallons, of oil had spilled. Coast Guard officials acknowledged that this might be the case, and that oil could have remained in the damaged tank.[5] Referring to the size of the spill, a Coast Guard officer said, "This is a big one." In response to the spill, emergency crews evacuated about 28 blocks of buildings around the site of the collision, but by the evening of the 23rd, residents had been allowed to return.[4]
Aftermath
A perimeter was established around the affected area, and none of the oil had harmed local wildlife.[4] The collision occurred in a still part of the channel, which helped to limit the flow of oil both upstream or downstream. AET activated their OPA 90 response plan and called upon Resolve Marine to lighter and refloat the damaged vessel while contractors worked to contain the oil spilled.[6] While the section of the waterway the collision occurred in is largely industrial, there are marshes along shorelines in other parts that are susceptible to damage from oil spills.[7] The collision closed the Port Arthur waterway, and Coast Guard personnel couldn't immediately comment on how long it would take to clean the spill or reopen the channel. The only statement made regarding the time it would take to reopen the waterway was that "We're working as quickly as possible to clean up the spill," according to a Coast Guard officer.[3] By the day after the incident, about 1,100 barrels of spilled oil had been recovered, and most of the unrecovered oil was contained. However, according to both the Coast Guard and local officials, the possibility of currents in the channel picking up remained, and with it the potential for oil to flow downstream into marshes.[8] Four oil refineries operate in the Port Arthur area, with a total capacity of about 1.1 million barrels of oil a day. In statements, neither Exxon or Valero, which operate two of the refineries, said they expected operations to be disrupted by the collision. Neither Motiva or Total, which operate the other two refineries, initially publicly responded to the spill.[4] In its response to the incident, the tanker's operator, AET Inc. said it was cooperating with investigators, and was prepared to bear the costs of cleanup, but noted that responsibility for the incident had not been determined. The company also refused to name the pilots in charge of the ship at the time of the collision.[8] On January 27, the tanker was removed from the waterway, and soon after, limited traffic through the channel was allowed to resume. In a statement on January 29th, the Coast Guard said they hoped to allow full operations in the waterway to resume within a week[9]
Effect on industry
The collision entirely closed the waterway for four days, with limited ship traffic allowed to resume January 27th, with operations planned to return to normal by February 5th. A total of 26 oil tankers were affected by the collision, with eight vessels waiting at the mouth of the channel by the time it was partially reopened. An officer from the Coast Guard said that their intent was to allow the largest tankers through the channel first. In response to the incident, the oil refinery operated by Motiva reduced production by 110,000 barrels per day, although whether other refineries reduced production was not clear, as further statements were not released from the operators of the refineries.[9]
See also
References
- ↑ "100123-G-0000A Vessel Collision Port Arthur". U.S. Coast Guard Visual Information Gallery. United States Coast Guard. 23 January 2010. http://cgvi.uscg.mil/media/main.php?g2_itemId=761823. Retrieved 30 May 2010.
- ↑ 2.0 2.1 Seba, Erwin (24 January 2010). "Tanker collision sends oil into Texas waterway". Reuters. http://www.reuters.com/article/idUSTRE60N0EI20100124. Retrieved 24 January 2010.
- ↑ 3.0 3.1 "Texas waterway remains closed after oil spill". Reuters. 24 January 2010. http://www.reuters.com/article/idUSN2415960120100125?type=marketsNews. Retrieved 24 January 2010.
- ↑ 4.0 4.1 4.2 4.3 Gonzalez, Angel (24 January 2010). "Collision Causes Crude Oil Spill in Texas". The Wall Street Journal. http://online.wsj.com/article/SB10001424052748704562504575021540843701582.html?mod=WSJ_hpp_sections_news. Retrieved 24 January 2010.
- ↑ "Coast Guard: Oil Spill in Texas Waterway Contained". The New York Times. 24 January 2010. http://www.nytimes.com/aponline/2010/01/24/us/AP-US-Oil-Spill.html?_r=1&scp=5&sq=oil%20spill&st=cse.[dead link]
- ↑ "Resolve Responds to Texas Spill". ISU Salvage World. March 2010. http://www.marine-salvage.com/salvage_world/Salvage%20World%20Q1%202010.pdf. Retrieved March 2010.
- ↑ "Oil spill at Texas port dumps 450,000 gallons". CNN. 23 January 2010. http://www.cnn.com/2010/US/01/23/texas.oil.spill/index.html. Retrieved 24 January 2010.
- ↑ 8.0 8.1 Gonzalez, Angel; Bustillo, Miguel (24 January 2010). "Oil Spill Hits Texas Port". The Wall Street Journal. http://online.wsj.com/article/SB10001424052748703415804575023471968893174.html?mod=WSJ_WSJ_US_News_5. Retrieved 24 January 2010.
- ↑ 9.0 9.1 "Texas waterway to fully reopen to ships in a week". Reuters. 29 January 2010. http://www.reuters.com/article/idUSN2912414520100129?type=marketsNews. Retrieved 31 January 2010.
| ||||||||||||||
