Conductive Characteristics within Coated Synthetic Fabrics

  1. Articles needing additional references from December 2011
  2. Articles with invalid date parameter in template
  3. All articles needing additional references
  4. Articles with topics of unclear notability from December 2011
  5. All articles with topics of unclear notability
  6. Pages with broken file links
  7. Orphaned articles from October 2010
  8. All orphaned articles
  9. Fluid dynamics
  10. Organic polymers
  11. Molecular electronics
  12. Pyrroles
  13. Organic semiconductors


This article has multiple issues. Please help improve it or discuss these issues on the talk page.
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (December 2011)
The topic of this article may not meet Wikipedia's general notability guideline. Please help to establish notability by adding reliable, secondary sources about the topic. If notability cannot be established, the article is likely to be merged, redirected, or deleted. (December 2011)
This article is an orphan, as no other articles link to it. Please introduce links to this page from related articles; suggestions may be available. (October 2010)

Conductive Characteristics with a Coated Synthetic Fabric demonstrates an energy current across a specific woven synthetic material, such energy generation in fabrics coated with a conductive polymer as found in polypyrrole.[1] First validated by D.D.S. developer M.H.Webb, the discovery showed that when PET[2] fabrics are coated by chemical synthesis[3] using four different oxidizing agent–dopant combinations present an increase in energy when a fixed source is applied to the fabric. Several combinations of blends have proven to be successful in transfer, anthracenedione-2-sulfonic acid (AQSA) sodium salt doped polypyrrole coating was the most effective in generation whereas the sodium perchlorate dopant system was the least effective. The power density per unit area achieved in polypyrrole coated polyester–Lycra fabric with 0.027 mol/l of AQSA acting as dopant was 430 W/m2. The power density per unit area achieved for the sodium perchlorate system, using the same synthesis conditions, was 55 W/m2.

References

  1. ↑ Polypyrrole
  2. ↑ PET
  3. ↑ Chemical Synthesis

External links


...