Gerotor

  1. Pages with broken file links
  2. All articles with unsourced statements
  3. Articles with unsourced statements from January 2009
  4. Articles with invalid date parameter in template
  5. Compressors
  6. Engine technology


File:Gerotor anm.gif
A Gerotor, image does not show intake/exhaust

A gerotor is a positive displacement pumping unit. The name gerotor is derived from "Generated Rotor". A gerotor unit consists of an inner and outer rotor. The inner rotor has N teeth, and the outer rotor has N+1 teeth. The inner rotor is located off-center and both rotors rotate. The geometry of the two rotors partitions the volume between them into N different dynamically-changing volumes. During the assembly's rotation cycle, each of these volumes changes continuously, so any given volume first increases, and then decreases. An increase creates a vacuum. This vacuum creates suction, and hence, this part of the cycle is where the intake is located. As a volume decreases compression occurs. During this compression period, fluids can be pumped, or compressed (if they are gaseous fluids).

Gerotor pumps are generally designed using a trochoidal inner rotor and an outer rotor formed by a circle with intersecting circular arcs.

A gerotor can also function as a pistonless rotary engine. High pressure gas enters the intake area and pushes against the inner and outer rotors, causing both to rotate as the area between the inner and outer rotor increases. During the compression period, the exhaust is pumped out.

History

At the most basic level, a gerotor is essentially one that is moved via fluid power. Originally this fluid was water, today the wider use is in hydraulic devices. Mr. Myron F. Hill, who might be called the father of the gerotor, in his booklet "Kinematics of Gerotors," lists efforts by a Mr. Galloway in 1787, by Messrs. Nash and Tilden in 1879, by Mr. Cooley in 1900, by Professor Lilly of Dublin University in 1915, and by Feuerheerd in 1918. These men were all working to perfect an internal gear mechanism with a one-tooth difference to provide displacement.

Mr. Hill made his first efforts in 1906, then, in 1921, gave his entire time to developing the gerotor. He developed a great deal of geometric theory bearing upon these rotors, coined the word GEROTOR (meaning GEnerated ROTOR) and secured basic patents on gerotors.

Gerotors are widely used today throughout industry, and are produced in a variety of shapes and sizes by a number of different methods.[citation needed]

Uses

See also

External links


...