Occupational safety and health

Occupational safety and health (OSH) is a cross-disciplinary area concerned with protecting the safety, health and welfare of people engaged in work or employment. The goals of occupational safety and health programs include to foster a safe and healthy work environment. OSH may also protect co-workers, family members, employers, customers, and many others who might be affected by the workplace environment.

Occupational safety and health can be important for moral, legal, and financial reasons. All organisations have a duty of care to ensure that employees and any other person who may be affected by the companies undertaking remain safe at all times. Moral obligations would involve the protection of employee's lives and health. Legal reasons for OSH practices relate to the preventative, punitive and compensatory effects of laws that protect worker's safety and health. OSH can also reduce employee injury and illness related costs, including medical care, sick leave and disability benefit costs. OSH may involve interactions among many subject areas, including occupational medicine, occupational hygiene, public health, safety engineering, industrial engineering, chemistry, health physics, ergonomics and occupational health psychology.

Definition

File:Stone Cutters working without any protection.jpg

Workers cutting Marble without any protective gear, Indore, India.

Since 1950, the International Labour Organization (ILO) and the World Health Organization (WHO) have shared a common definition of occupational health. It was adopted by the Joint ILO/WHO Committee on Occupational Health at its first session in 1950 and revised at its twelfth session in 1995. The definition reads:

"Occupational health should aim at: the promotion and maintenance of the highest degree of physical, mental and social well-being of workers in all occupations; the prevention amongst workers of departures from health caused by their working conditions; the protection of workers in their employment from risks resulting from factors adverse to health; the placing and maintenance of the worker in an occupational environment adapted to his physiological and psychological capabilities; and, to summarize, the adaptation of work to man and of each man to his job.

"The main focus in occupational health is on three different objectives: (i) the maintenance and promotion of workers’ health and working capacity; (ii) the improvement of working environment and work to become conducive to safety and health and (iii) development of work organizations and working cultures in a direction which supports health and safety at work and in doing so also promotes a positive social climate and smooth operation and may enhance productivity of the undertakings. The concept of working culture is intended in this context to mean a reflection of the essential value systems adopted by the undertaking concerned. Such a culture is reflected in practice in the managerial systems, personnel policy, principles for participation, training policies and quality management of the undertaking."

—Joint ILO/WHO Committee on Occupational Health

Workplace hazards

Physical and mechanical hazards

File:Construction workers not wearing fall protection equipment.jpg

At-risk workers without appropriate safety equipment

Physical hazards are a common source of injuries in many industries. They are perhaps unavoidable in many industries such as construction and mining, but over time people have developed safety methods and procedures to manage the risks of physical danger in the workplace. Employment of children may pose special problems.

Falls are a common cause of occupational injuries and fatalities, especially in construction, extraction, transportation, healthcare, and building cleaning and maintenance.

An engineering workshop specialising in the fabrication and welding of components has to follow the Personal Protective Equipment (PPE) at work regulations 1992. It is an employers duty to provide ‘all equipment (including clothing affording protection against the weather) which is intended to be worn or held by a person at work which him against one or more risks to his health and safety’. In a fabrication and welding workshop an employer would be required to provide face and eye protection, safety footwear, overalls and other necessary PPE.

Machines are commonplace in many industries, including manufacturing, mining, construction and agriculture, and can be dangerous to workers. Many machines involve moving parts, sharp edges, hot surfaces and other hazards with the potential to crush, burn, cut, shear, stab or otherwise strike or wound workers if used unsafely. Various safety measures exist to minimize these hazards, including lockout-tagout procedures for machine maintenance and roll over protection systems for vehicles. According to the United States Bureau of Labor Statistics, machine-related injuries were responsible for 64,170 cases that required days away from work in 2008. More than a quarter of these cases required more than 31 days spent away from work. That same year, machines were the primary or secondary source of over 600 work-related fatalities. Machines are also often involved indirectly in worker deaths and injuries, such as in cases in which a worker slips and falls, possibly upon a sharp or pointed object.

Confined spaces also present a work hazard. The National Institute of Occupational Safety and Health defines "confined space" as having limited openings for entry and exit and unfavorable natural ventilation, and which is not intended for continuous employee occupancy. These kind of spaces can include storage tanks, ship compartments, sewers, and pipelines. Confined spaces can pose a hazard not just to workers, but also to people who try to rescue them.

Noise also presents a fairly common workplace hazard: occupational hearing loss is the most common work-related injury in the United States, with 22 million workers exposed to hazardous noise levels at work and an estimated $242 million spent annually on worker's compensation for hearing loss disability. Noise is not the only source of occupational hearing loss; exposure to chemicals such as aromatic solvents and metals including lead, arsenic, and mercury can also cause hearing loss.

Temperature extremes can also pose a danger to workers. Heat stress can cause heat stroke, exhaustion, cramps, and rashes. Heat can also fog up safety glasses or cause sweaty palms or dizziness, all of which increase the risk of other injuries. Workers near hot surfaces or steam also are at risk for burns. Dehydration may also result from overexposure to heat. Cold stress also poses a danger to many workers. Overexposure to cold conditions or extreme cold can lead to hypothermia, frostbite, trench foot, or chilblains.

Electricity poses a danger to many workers. Electrical injuries can be divided into four types: fatal electrocution, electric shock, burns, and falls caused by contact with electric energy.

Vibrating machinery, lighting, and air pressure can also cause work-related illness and injury. Asphyxiation is another potential work hazard in certain situations. Musculoskeletal disorders are avoided by the employment of good ergonomic design and the reduction of repeated strenuous movements or lifts

Biological and chemical hazards

Biological hazards

See also: Biological hazards

• Bacteria
• Virus
• Fungi
  • Mold
• Blood-borne pathogens
• Tuberculosis

Chemical hazards

• Acids
• Bases
• Heavy metals
  • Lead
• Solvents
  • Petroleum
• Particulates
  • Asbestos and other fine dust/fibrous materials
  • Silica
• Fumes (noxious gases/vapors)
• Highly-reactive chemicals
• Fire, conflagration and explosion hazards:
  • Explosion
  • Deflagration
  • Detonation
  • Conflagration

Psychological and social issues

• Work-related stress, whose causal factors include excessive working time and overwork
• Violence from outside the organisation
• Bullying, which may include emotional and verbal abuse
• Sexual harassment
• Mobbing
• Burnout
• Exposure to unhealthy elements during meetings with business associates, e.g. tobacco, uncontrolled alcohol

Occupational safety and health by industry

Specific occupational safety and health concerns vary greatly by sector and industry. Construction workers might be particularly at risk of falls, for instance, whereas fishermen might be particularly at risk of drowning. The United States Bureau of Labor Statistics identifies the fishing, aviation, lumber, metalworking, agriculture, mining and transportation industries as among some of the more dangerous for workers.

Construction

See also: Construction site safety

Construction is one of the most dangerous occupations in the world, incurring more occupational fatalities than any other sector in both the United States and in the European Union. In 2009, the fatal occupational injury rate among construction workers in the United States was nearly three times that for all workers. Falls are one of the most common causes of fatal and non-fatal injuries among construction workers. Proper safety equipment such as harnesses and guardrails and procedures such as securing ladders and inspecting scaffolding can curtail the risk of occupational injuries in the construction industry.

Agriculture

See also: Agriculture

File:Ford Tractor with ROPS bar fitted.JPG

Rollover protection bar on a Fordson tractor.

Agriculture workers are often at risk of work-related injuries, lung disease, noise-induced hearing loss, skin disease, as well as certain cancers related to chemical use or prolonged sun exposure. On industrialized farms, injuries frequently involve the use of agricultural machinery. The most common cause of fatal agricultural injuries in the United States is tractor rollovers, which can be prevented by the use of roll over protection structures which limit the risk of injury in case a tractor rolls over. Pesticides and other chemicals used in farming can also be hazardous to worker health, and workers exposed to pesticides may experience illnesses or birth defects. As an industry in which families, including children, commonly work alongside their families, agriculture is a common source of occupational injuries and illnesses among younger workers. Common causes of fatal injuries among young farm worker include drowning, machinery and motor vehicle-related accidents.

Service sector

As the number of service sector jobs has risen in developed countries, more and more jobs have become sedentary, presenting a different array of health problems than those associated with manufacturing and the primary sector. Contemporary problems such as the growing rate of obesity and issues relating to stress and overwork in many countries have further complicated the interaction between work and health.

Workplace fatalities statistics

European Union

In most countries males comprise the vast majority of workplace fatalities. In the EU as a whole, 94% of death were of males. In the UK the disparity was even greater with males comprising 97.4% of workplace deaths.

US Statistics

The Bureau of Labor Statistics of the United States Department of Labor compiles information about workplace fatalities in the United States. Since 1992, the year with the most workplace fatalities was 1994 with 6,632 fatalities, and the lowest in 2002 with 5,534.
File:Number of Fatal Work Injuries 1992-2006.gif

The Bureau also compiles information about the most dangerous jobs. The most recent information comes from the year 2006, during which 5,840 people died on the job.

Job	Fatalities	Fatalities per 100,000 employees
Fishermen	53	152.0
Pilots	104	70.6
Timber cutter	66	93.5
Structural metal workers	36	61.0
Waste collectors	37	29.8
Farmers and ranchers	292	42.5
Power-line workers	38	34.9
Miners	156	37.0
Roofers	81	32.4
Truck drivers	957	23.0
All occupations	5,840	4.0

History

The research and regulation of occupational safety and health are a relatively recent phenomenon. As labor movements arose in response to worker concerns in the wake of the industrial revolution, worker's health entered consideration as a labor-related issue.

In 1833, HM Factory Inspectorate was formed in the United Kingdom with a remit to inspect factories and ensure the prevention of injury to child textile workers.

In 1840 a Royal Commission published its findings on the state of conditions for the workers of the mining industry that documented the appallingly dangerous environment that they had to work in and the high frequency of accidents. The commission sparked public outrage which resulted in the Mines Act of 1842. The act set up an inspectorate for mines and collieries which resulted in many prosecutions and safety improvements, and by 1850, inspectors were able to enter and inspect premises at their discretion.

File:Lewis Wickes Hines - Harry McShane 1908.jpg

Harry McShane, age 16, 1908. Pulled into machinery in a factory in Cincinnati. His arm was ripped off at the shoulder and his leg broken. No compensation paid. Photograph by Lewis Hine.

Otto von Bismarck inaugurated the first social insurance legislation in 1883 and the first worker's compensation law in 1884 - the first of their kind in the Western world. Similar acts followed in other countries, partly in response to labor unrest.

Occupational Safety and Health Management Systems

International

In 2001, the International Labor Organization (ILO) published ILO-OSH 2001, also titled "Guidelines a on occupational safety and health management systems" to assist organizations with introducing OSH management systems. These guidelines encourage continual improvement in employee health and safety, achieved via a constant process of policy, organization, planning & implementation, evaluation, and action for improvement, all supported by constant auditing to determine the success of OSH actions.

The ILO management system was created to assist employers to keep pace with rapidly shifting and competitive industrial environments. The ILO recognizes that national legislation is essential, but sometimes insufficient on its own to address the challenges faced by industry, and therefore elected to ensure free and open distribution of administrative tools in the form of occupational health and safety management system guidance for everyone. This open access forum is intended to provide the tools for industry to create safe and healthy working environments and foster positive safety cultures within the organizations.^{[citation needed]}

OHSAS 18000 is an international occupational health and safety management system specification developed by the London-based BSI Group, a multinational business chiefly concerned with the production and distribution of standards related services. OHSAS 18000 comprises two parts, OHSAS 18001 and 18002 and embraces a number of other publications. OHSAS 18000 is the internationally recognized assessment specification for occupational health and safety management systems. It was developed by a selection of leading trade bodies, international standards and certification bodies to address a gap where no third-party certifiable international standard exists. This internationally recognized specification for occupational health and safety management system operates on the basis of policy, planning, implementation and operation, checking and corrective action, management review, and continual improvement.^{[citation needed]}

The British Standards - Occupational Health and Safety management Systems Requirements Standard BS OHSAS 18001 was developed within the framework of the ISO standards series. Allowing it to integrate better into the larger system of ISO certifications. ISO 9001 Quality Management Systems and ISO 14001 Environmental Management System can work in tandem with BS OHSAS 18001/18002 to complement each other and form a better overall system. Each component of the system is specific, auditable, and accreditable by a third party after review.

Also Standards Australia and the Association Française de Normalisation (AFNOR) in France have developed occupational safety and health management standards.

United Kingdom

Guidance note HSG65: Successful Health and Safety Management, published by the British non-departmental public body Health and Safety Executive, promotes a systematic management of health and safety through a six step system, policy, organizing, planning and implementing, measuring performance, reviewing performance. These components are all linked to an audit system providing for evaluation and a feedback loop to improve performance. This systematic approach allows flexibility for the company through good business planning to strategically apply resources according to risk priorities.

National Legislation and Public Organizations

Occupational safety and health practice vary among nations with different approaches to legislation, regulation, enforcement, and incentives for compliance. In the EU, for example, some member states promote OSH by providing public monies as subsidies, grants or financing, while others have created tax system incentives for OSH investments. A third group of EU member states has experimented with using workplace accident insurance premium discounts for companies or organisations with strong OSH records.

File:NumberOSHInspectors.jpg

The number of OSH personnel employed to ensure compliance to OSH rules varies markedly between countries.

European Union

In the European Union, member states have enforcing authorities to ensure that the basic legal requirements relating to occupational health and safety are met. In many EU countries, there is strong cooperation between employer and worker organisations (e.g. unions) to ensure good OSH performance as it is recognized this has benefits for both the worker (through maintenance of health) and the enterprise (through improved productivity and quality). In 1996, the European Agency for Safety and Health at Work was founded.

Member states of the European Union have all transposed into their national legislation a series of directives that establish minimum standards on occupational health and safety. These directives (of which there are about 20 on a variety of topics) follow a similar structure requiring the employer to assess the workplace risks and put in place preventive measures based on a hierarchy of control. This hierarchy starts with elimination of the hazard and ends with personal protective equipment.

However, certain EU member states admit to having lacking quality control in occupational safety services, to situations in which risk analysis takes place without any on-site workplace visits and to insufficient implementation of certain EU OSH directives. Based on this, it is hardly surprising that the total societal costs of work-related health problems and accidents vary from 2.6% to 3.8% of GNP between the EU member states.

United Kingdom

In the UK, health and safety legislation is drawn up and enforced by the Health and Safety Executive and local authorities (the local council) under the Health and Safety at Work etc. Act 1974. Increasingly in the UK the regulatory trend is away from prescriptive rules, and towards risk assessment. Recent major changes to the laws governing asbestos and fire safety management embrace the concept of risk assessment.

Denmark

In Denmark, occupational safety and health is regulated by the Danish Act on Working Environment and cooperation at the workplace. The Danish Working Environment Authority carries out inspections of companies, draws up more detailed rules on health and safety at work and provides information on health and safety at work. The result of each inspection is made public on the web pages of the Danish Working Environment Authority so that the general public, current and prospective employees, customers and other stakeholders can inform themselves about whether a given organization has passed the inspection, should they wish to do so.

United States

In the United States, the Occupational Safety and Health Act of 1970 created both the National Institute for Occupational Safety and Health (NIOSH) and the Occupational Safety and Health Administration (OSHA). OSHA, in the U.S. Department of Labor, is responsible for developing and enforcing workplace safety and health regulations. NIOSH, in the U.S. Department of Health and Human Services, is focused on research, information, education, and training in occupational safety and health.

OSHA has been regulating occupational safety and health since 1971. Occupational safety and health regulation of a limited number of specifically defined industries was in place for several decades before that, and broad regulations by some individual states was in place for many years prior to the establishment of OSHA.

Canada

In Canada, workers are covered by provincial or federal labour codes depending on the sector in which they work. Workers covered by federal legislation (including those in mining, transportation, and federal employment) are covered by the Canada Labour Code; all other workers are covered by the health and safety legislation of the province they work in. The Canadian Centre for Occupational Health and Safety (CCOHS), an agency of the Government of Canada, was created in 1978 by an Act of Parliament. The act was based on the belief that all Canadians had "...a fundamental right to a healthy and safe working environment." CCOHS is mandated to promote safe and healthy workplaces to help prevent work-related injuries and illnesses.

Malaysia

In Malaysia, the Department of Occupational Safety and Health (DOSH) under the Ministry of Human Resource is responsible to ensure that the safety, health and welfare of workers in both the public and private sector is upheld. DOSH is responsible to enforce the Factories and Machinery Act 1967 and the Occupational Safety and Health Act 1994.

People's Republic of China

In the People's Republic of China, the Ministry of Health is responsible for occupational disease prevention and the State Administration of Work Safety for safety issues at work. On the provincial and municipal level, there are Health Supervisions for occupational health and local bureaus of Work Safety for safety. The "Occupational Disease Control Act of PRC" came into force on May 1, 2002. and Work safety Act of PRC on November 1, 2002. The Occupational Disease Control Act is under revising. The prevention of occupational disease is still in its initial stage compared with industried countries such as the US or UK.

South Africa

In South Africa the Department of Labour is responsible for occupational health and safety inspection and enforcement in commerce and industry apart from mining and energy production, where the Department of Minerals and Energy is responsible.

The main statutory legislation on Health and Safety in the jurisdiction of the Department of Labour is Act No. 85 of 1993: Occupational Health and Safety Act as amended by Occupational Health and Safety Amendment Act, No. 181 Of 1993.

Regulations to the OHS Act include:

• Certificate of Competency Regulations, 1990
• Construction Regulations, 2003
• Diving Regulations 2009
• Driven Machinery Regulations, 1988
• Environmental Regulations for Workplaces, 1987
• General Machinery regulations, 1988
• General Safety Regulations, 1986
• Noise induced hearing loss regulations, 2003
• Pressure Equipment Regulations, 2004

Roles and Responsibilities of Occupational Health and Safety Professionals

The roles and responsibilities of OSH professionals vary regionally, but may include evaluating working environments, developing, endorsing and encouraging measures that might prevent injuries and illnesses, providing OSH information to employers, employees, and the public, providing medical examinations, and assessing the success of worker health programs.

Europe

In Norway, the main required tasks of an Occupational Health and Safety Practitioner include:

• Systematic evaluations of the working environment
• Endorsing preventative measures which eliminate reasons for illnesses in the work place
• Giving information in the subject of employees’ health
• Giving information on occupational hygiene, ergonomics and also environmental and safety risks in the work place

In the Netherlands, required tasks for health and safety staff are only summarily defined, and include:

• Voluntary medical examinations
• A consulting room on the work environment for the workers
• Health check assessments (if needed for the job concerned)

‘The main influence on the Dutch law on the job of the safety professional is through the requirement on each employer to use the services of a certified working conditions service to advise them on health and safety’. A ‘certified service’ must employ sufficient numbers of four types of certified experts to cover the risks in the organisations which use the service:

• A safety professional
• An occupational hygienist
• An occupational physician
• A work and organisation specialist.

It shows in Table 1 (based on the European Network of Safety and Health Practitioner Organisations [ENHSPO] survey to) that in Norway, 37% of Health and Safety practitioners had a MSc education level, and 14% in the Netherlands; 44% were BSc graduates and 63% in the Netherlands; and 19% were of a Technician level and 23% in the Netherlands.

USA

File:Occupational Safety Equipment.jpg

Leather craftsman gloves, safety goggles, and a properly fitted hardhat are crucial for proper safety in a construction environment.

The main tasks undertaken by the OHS practitioner in the USA include:

• Develop processes, procedures, criteria, requirements, and methods to attain the best possible management of the hazards and exposures that can cause injury to people, and damage property, or the environment;

• Apply good business practices and economic principles for efficient use of resources to add to the importance of the safety processes;
• Promote other members of the company to contribute by exchanging ideas and other different approaches to make sure that every one in the corporation possess OHS knowledge and have functional roles in the development and execution of safety procedures;
• Assess services, outcomes, methods, equipment, workstations, and procedures by using qualitative and quantitative methods to recognise the hazards and measure the related risks;
• Examine all possibilities, effectiveness, reliability, and expenditure to attain the best results for the company concerned

Knowledge required by the OHS professional in USA include:

• Constitutional and case law controlling safety, health, and the environment
• Operational procedures to plan/develop safe work practices
• Safety, health and environmental sciences
• Design of hazard control systems (i.e. fall protection, scaffoldings)
• Design of recordkeeping systems that take collection into account, as well as storage, interpretation, and dissemination
• Mathematics and statistics
• Processes and systems for attaining safety through design

Some skills required by the OHS professional in the USA include (but are not limited to):

• Understanding and relating to systems, policies and rules
• Holding checks and having control methods for possible hazardous exposures
• Mathematical and statistical analysis
• Examining manufacturing hazards
• Planning safe work practices for systems, facilities, and equipment
• Understanding and using safety, health, and environmental science information for the improvement of procedures
• Interpersonal communication skills

Differences across countries and regions

Because different countries take different approaches to ensuring occupational safety and health, areas of OSH need and focus also vary between countries and regions. Similar to the findings of the ENHSPO survey conducted in Australia, the Institute of Occupational Medicine found that in the UK, there is a need to put a greater emphasis on work-related illness. In contrast, in Australia and the USA a major responsibility of the OHS professional is to keep company directors and managers aware of the issues that they face in regards to Occupational Health and Safety principles and legislation. However, in some other areas of Europe, it is precisely this which has been lacking: “Nearly half of senior managers and company directors do not have an up-to-date understanding of their health and safety-related duties and responsibilities.”

Identifying Safety and Health Hazards

Hazards, risks, outcomes

The terminology used in OSH varies between countries, but generally speaking:

• A hazard is something that can cause harm if not controlled.
• The outcome is the harm that results from an uncontrolled hazard.
• A risk is a combination of the probability that a particular outcome will occur and the severity of the harm involved.^{[citation needed]}

“Hazard”, “risk”, and “outcome” are used in other fields to describe e.g. environmental damage, or damage to equipment. However, in the context of OSH, “harm” generally describes the direct or indirect degradation, temporary or permanent, of the physical, mental, or social well-being of workers. For example, repetitively carrying out manual handling of heavy objects is a hazard. The outcome could be a musculoskeletal disorder (MSD) or an acute back or joint injury. The risk can be expressed numerically (e.g. a 0.5 or 50/50 chance of the outcome occurring during a year), in relative terms (e.g. "high/medium/low"), or with a multi-dimensional classification scheme (e.g. situation-specific risks).^{[citation needed]}

Hazard Assessment

Hazard analysis or hazard assessment is a process in which individual hazards of the workplace are identified, assessed and controlled/eliminated as close to source (location of the hazard) as reasonable and possible. As technology, resources, social expectation or regulatory requirements change, hazard analysis focuses controls more closely toward the source of the hazard. Thus hazard control is a dynamic program of prevention. Hazard-based programs also have the advantage of not assigning or implying there are "acceptable risks" in the workplace. A hazard-based program may not be able to eliminate all risks, but neither does it accept "satisfactory"—but still risky—outcomes. And as those who calculate and manage the risk are usually managers while those exposed to the risks are a different group, workers, a hazard-based approach can by-pass conflict inherent in a risk-based approach.^{[citation needed]}

Risk assessment

Further information: Risk assessment#Risk assessment in public health

Modern occupational safety and health legislation usually demands that a risk assessment be carried out prior to making an intervention. It should be kept in mind that risk management requires risk to be managed to a level which is as low as is reasonably practical.^{[citation needed]}

This assessment should:

• Identify the hazards
• Identify all affected by the hazard and how
• Evaluate the risk
• Identify and prioritize appropriate control measures^{[citation needed]}

The calculation of risk is based on the likelihood or probability of the harm being realized and the severity of the consequences. This can be expressed mathematically as a quantitative assessment (by assigning low, medium and high likelihood and severity with integers and multiplying them to obtain a risk factor), or qualitatively as a description of the circumstances by which the harm could arise.^{[citation needed]}

The assessment should be recorded and reviewed periodically and whenever there is a significant change to work practices. The assessment should include practical recommendations to control the risk. Once recommended controls are implemented, the risk should be re-calculated to determine of it has been lowered to an acceptable level. Generally speaking, newly introduced controls should lower risk by one level, i.e., from high to medium or from medium to low.^{[citation needed]}

Contemporary developments

On an international scale, the World Health Organization (WHO) and the International Labour Organization (ILO) have begun focusing on labour environments in developing nations with projects such as Healthy Cities. Many of these developing countries are stuck in a situation in which their relative lack of resources to invest in OSH leads to increased costs due to work-related illnesses and accidents. As a 2007 Factsheet from the European Agency for Safety and Health at Work states: "Countries with less developed OSH systems spend a far higher percentage of GDP on work-related injury and illness — taking resources away from more productive activities . . . The ILO estimates that work-related illness and accidents cost up to 10% of GDP in Latin America, compared with just 2.6% to 3.8% in the EU."

Nanotechnology

See also: Health implications of nanotechnology

Nanotechnology is an example of a new, relatively as-of-yet unstudied technology. A Swiss survey of one hundred thirty eight companies using or producing nanoparticulate matter in 2006, resulted in forty completed questionnaires. Sixty five per cent of respondent companies stated they did not have a formal risk assessment process for dealing with nanoparticulate matter. Nanotechnology already presents new issues for OSH professionals that will only become more difficult as nanostructures become more complex. The size of the particles renders most containment and personal protective equipment ineffective. The toxicology values for macro sized industrial substances are rendered inaccurate due to the unique nature of nanoparticulate matter. As nanoparticulate matter decreases in size its relative surface area increases dramatically, increasing any catalytic effect or chemical reactivity substantially versus the known value for the macro substance. This presents a new set of challenges in the near future to rethink contemporary measures to safeguard the health and welfare of employees against a nanoparticulate substance that most conventional controls have not been designed to manage.

Occupational health psychology

Occupational health psychology (OHP), a related discipline, is a relatively new field that combines elements of occupational health and safety, industrial/organizational psychology, and health psychology. The field is concerned with identifying work-related psychosocial factors that adversely affect the health of people who work. OHP is also concerned with developing ways to effect change in workplaces for the purpose of improving the health of people who work. For more detail on OHP, see the section on occupational health psychology.

See also

• Examinetics - mobile occupational health screening
• Institute of Occupational Medicine
• Occupational disease
• Occupational hygiene
• Occupational therapy
• Prevention through design
• Product stewardship
• Public safety
• Seoul Declaration on Safety and Health at Work
• Work accident
• Workers' compensation

Government organizations

• Canadian Centre for Occupational Health and Safety (Canada)
• European Agency for Safety and Health at Work (EU)
• Health and Safety Executive (UK)
• International Labour Organisation (United Nations)
• National Institute for Occupational Safety and Health (US)
• National Institute of Occupational Health (Norway)
• Occupational Safety and Health Administration (US)
• Workplace Safety & Health Council (Singapore)
• Workplace Safety & Insurance Board (Ontario, Canada)
• Safe Work Australia
• WorkSafe Victoria, Australia
• Workplace Safety & Health Council, Singapore

Laws

• Health and Safety at Work Act (UK)
• Occupational Safety and Health Act (US)
• Occupational Safety and Health Act 1994 (Malaysia)
• Timeline of major U.S. environmental and occupational health regulation
• Workplace Safety and Health Act (Singapore)

Related fields

• Certified safety professional
• Construction site safety
• Control banding
• Environmental Health
• Ergonomics, Participatory Ergonomics
• Hazard analysis
• Hazard prevention
• Hazop
• Hearing conservation program
• Industrial hygiene
• Industrial engineering
• Industrial Union Department v. American Petroleum Institute
• Infection control
• Loss-control consultant
• Material safety data sheet
• Mine safety
• Occupational health psychology
• Occupational Medicine & Occupational disease
• Occupational fatality
• Process Safety Management
• Public health
• Safe-In-Sound Award Excellence in Hearing Loss Prevention Award
• Safety engineering
• Toxicology

Further reading

• Health and Safety Executive (2009): A Guide to Safety and Health Regulation in Great Britain. 4th edition. ISBN 978-0-7176-6319-4, http://www.hse.gov.uk/pubns/web42.pdf
• OSAH Safety 1
• OHSAS 18000 series: (derived from a British Standard, OHSAS is intended to be compatible with ISO 9000 and 14000 series standards, but is not itself an ISO standard)

External links

• (US) CDC page on Workplace Safety & Health
• (EU) Health-EU Portal - Health and Safety at work
• European Academy of Occupational Health Psychology
• ILO International Occupational Safety and Health Information Centre
• Society for Occupational Health Psychology
• UK Health & Safety Executive - Getting started for Small Business
• IOSH Occupational Health Toolkit
• News and Information on Occupational Safety and Health
• Employements on Occupational Safety and Health
• Content of OHSAS 18001safety manual
• iAuditor Risk Assessment Application General Information

ar:أمن صناعي