Pile driver

This article is about the mechanical device used in construction. For other uses, see Pile driver (disambiguation).

File:Junttan piling machine in Jyväskylä.jpg

A Junttan piling machine in Jyväskylä, Finland

File:Kafar na Odrze.jpg

A crane with a pile driver.

A pile driver is a mechanical device used to drive piles into soil to provide foundation support for buildings or other structures. The term is also used in reference to members of the construction crew that work with pile-driving rigs.

One traditional type of pile driver includes a heavy weight placed between guides so that it is able to freely slide up and down in a single line. It is placed upon a pile. The weight is raised, which may involve the use of hydraulics, steam, diesel, or manual labour. When the weight reaches its highest point it is then released and smashes on to the pile in order to drive it into the ground.

History

File:Roman Pile Driver, Festung Ehrenbreitstein, Koblenz, Germany.jpg

Roman pile driver (replica) used at the construction of Caesar's Rhine bridges (55 BC)

There is a number of claims to the inventor of the pile driver. A mechanically sound drawing of a pile driver appeared as early as 1475 in Francesco di Giorgio Martini's treatise Trattato di Architectura. Also, several other prominent inventors — James Nasmyth (son of Alexander Nasmyth), watchmaker James Valoué, Count Giovan Battista Gazzola, and Leonardo da Vinci — have all been credited with inventing the device. However, there is evidence that a comparable device was used in the construction of Crannogs at Oakbank and Loch Tay in Scotland as early as 5000 years ago. Otis Tufts is credited with inventing the steam pile driver in the United States.

Types

Ancient pile driving equipment used manual or animal labor to lift heavy weights, usually by means of pulleys, to drop the weight onto the end of the pile. Modern piledriving equipment uses various methods to raise the weight and guide the pile.

Diesel hammer

A modern diesel pile hammer is a very large two-stroke diesel engine. The weight is the piston, and the apparatus which connects to the top of the pile is the cylinder. Piledriving is started by having the weight raised by auxiliary means — usually a cable from the crane holding the pile driver — which draws air into the cylinder. The weight is dropped, using a quick-release. The weight of the piston compresses the air, heating it to the ignition point of diesel fuel. Diesel fuel is added/injected into the cylinder. The mixture ignites, transferring the energy of the falling weight to the pile head, and driving the weight back up. The rising weight draws in fresh air, and the cycle starts over until the fuel runs out or is stopped by the pile crew.

From an army manual on pile driving hammers:

The initial start up of the hammer requires the piston (ram) to be raised to a point where the trip automatically releases the piston, allowing it to fall by gravity. As the piston falls, it activates the fuel pump, which discharges a metered amount of fuel into the ball pan of the impact block. The falling piston also blocks the exhaust ports, and compression of fuel trapped in the cylinder begins. The compressed air exerts a pre-load force (approx. 44,000 lbs. or 20,000 kg.) to hold the impact block firmly against the drive cap and pile. At the bottom of the compression stroke, the piston strikes the impact block, atomizing the fuel and starting the pile on its downward movement. In the instant after the piston strikes, the atomized fuel ignites, and the resulting explosion exerts an even greater force on the already moving pile, driving it further into the ground. The reaction of the explosion rebounding from the resistance of the pile drives the piston upward. As the piston rises, the exhaust ports open, releasing the gases and force of the explosion into the atmosphere. After the piston stops its upward movement, it again falls by gravity to start another cycle.

Hydraulic hammer

A hydraulic hammer is a modern type of piling hammer used in place of diesel and air hammers for driving steel pipe, precast concrete, and timber piles. Hydraulic hammers are more environmentally acceptable than the older, less efficient hammers as they generate less noise and pollutants. However, in many cases the dominant noise is caused by the impact of the hammer on the pile, or the impacts between components of the hammer, so that the resulting noise level can be very similar to diesel hammers.

Hydraulic press-in

File:Wintersburg canal Huntington Beach CA.JPG

A steel sheet pile being hydraulically pressed

Specialty equipment which installs piles using hydraulic rams to press piles into the ground. This system is preferred where vibration is a concern. There are press attachments that can adapt to conventional pile driving rigs to press 2 pairs of sheet piles at a time. Additional types of press equipment sit on top of existing sheet piles and grip onto previously driven piles. This system allows for greater press-in and extraction force to be used since more reaction force is developed. The reaction based machines operate at only 69dB at 23 ft allowing for installation and extraction of piles in very close proximity to noise and vibration sensitive areas where traditional methods may threaten the stability of existing structures.

Such equipment and methods are specified into portions of the internal drainage system in the New Orleans area after Hurricane Katrina as well as many projects around the world where noise, vibrations and limited access are a concern during the engineering, design and construction phases of the project.

Vibratory pile driver/extractor

File:Vibratorypiledriver05.JPG

A vibratory pile driver on a steel H-pile powered by a diesel engine.

Vibratory pile hammers contain a system of counter-rotating eccentric weights, powered by hydraulic motors, and designed in such a way that horizontal vibrations cancel out, while vertical vibrations are transmitted into the pile. The pile driving machine is lifted and positioned over the pile by means of an excavator or crane, and is fastened to the pile by a clamp and/or bolts. Vibratory hammers can either drive in or extract a pile; extraction is commonly used to recover steel "H" piles used in temporary foundation shoring. Hydraulic fluid is typically supplied to the driver by a diesel engine powered pump mounted in a trailer or van and connected to the driver head through a set of long hoses. When the pile driver is connected to a dragline excavator, it is powered by the excavator's own diesel engine. Vibratory pile drivers are often chosen to mitigate noise, as when the construction is very close to residence or office buildings, or when there is not enough vertical clearance above the foundation to permit use of a conventional pile hammer (for example when retrofitting additional piles to a bridge column or abutment footing). Hammers are available with several different vibration rates, ranging from about 1200 vibrations per minute to about 2400 VPM; the vibration rate chosen is influenced by soil conditions at the site and other factors such as power requirements and purchase price of the equipment.

Piling rig

A piling rig is a construction machine for piling in foundation engineering. It is mainly applied to drill in sandy soil, clay, silty clay, etc. and widely used cast-in-place piles, diaphragm walls, foundation reinforcement and other foundation projects. Its rated power of engine is around 108-450 kW, output torque 60-400 kN•m, maximum pile diameter 1.5–4 m, maximum pile depth 60–90 m. It can meet construction requirement of kinds of foundation engineering projects. It generally applies hydraulic crawler chassis, automatic lift box-type mast, telescopic drill pipe, auto vertical adjustor, depth indicator, etc. Its operation applies hydraulic pilot control, load sensor, thus it is easy and comfortable to control. Main and auxiliary hoisting can meet different requirements in construction sites. The rig can be used on piling construction in dry (short screw), wet soil (rotary bucket) and rock (core drill) by equipping with drilling tool, and can be equipped with long screw drill, diaphragm wall grab, vibratory hammer, etc., to realize many functions. It is mainly used in foundation engineering of municipal construction, expressway, bridge, industrial and civil buildings, diaphragm wall, water conservancy project, Slope protection, etc.

Piling rigs categories

1. small-sized - torque is around 60-100 kN•m, engine power 108 kW, drilling diameter 0.5-1.2m, drilling depth 40m, total quality 40t.
2. middle-sized - torque is around 120-180 kN•m, engine power 125-200 kW, drilling diameter 0.8-1.8m, drilling depth 60m, total quality 42-65t.
3. large-sized - torque is around 240 kN•m, engine power 300 kW, drilling diameter 1-2.5m, drilling depth 80m, total quality 100t

Environmental effects

The underwater sound pressure caused by pile-driving may be deleterious to fish when conducted adjacent to fish-bearing waters. State and local regulatory agencies manage environment issues associated with pile-driving.

See also

• Auger
• Deep foundation
• Otis Tufts
• Post pounder
• Drilling rig

External links

• Powerquip Co., Ltd.- Leading manufacturer of Hydraulic Power Pack for the Pile Drivers
• International Construction Equipment, Inc.- Manufacturer of vibratory pile drivers
• Website about Vulcan Iron Works, which produced pile drivers from the 1870s through the 1990s
• Rock River Thresheree, Inc. has a working American Hoist & Derrick steam pile driver with a Vulcan single-acting steam hammer; it can be seen in action every Labor Day weekend
• [1]- Leading manufacturer of Hydraulic Pile Drivers
• American Piledriving Equipment, Inc. A.P.E. - World's Largest Provider of Foundation Construction Equipment
• J&M Foundation Equipment, LLC - Manufacturers of Vibratory Piledrivers and Related Deep Foundation Equipmentaf:Heimasjien