Rouging
Rouging refers to a form of corrosion found in stainless steel. It can be due to iron contamination of the stainless steel surface due to welding of non-stainless steel for support columns, or other temporary means, which when welded off leaves a low chromium area.[1]
There are three classes of rouging: Class I, Class II, and Class III.
Class I - stainless steel surface and the Cr/Fe ratio of the metal surface beneath such deposits usually remain unaltered.
Class II - Iron particles originating in-situ on unpassivated or improperly passivated stainless steel surfaces. By their formation the Cr/Fe ratio of the metal surface is altered.
Class III - Iron oxide (or scale) which forms on surfaces in high temperature steam systems. The Cr/Fe ratio of the protective film is usually altered.
References
External links
| 30px | This article about a mechanical engineering topic is a stub. You can help Oilfield Wiki by expanding it. |
