Technetics Group
Profile
Technetics Group is a globally trusted source for engineered components, seals, assemblies, sub-systems and coatings that are custom-designed for high performance and extreme applications.
Address
10633 w. Little York, Bldg 3 Ste 300
Houston, TX 77041
United States
Phone: 1-713-983-4201
Fax: 1-713-466-3721
Product
Name: Advanced Coatings
Description: Technetics Group is a world leader in the providing advanced coatings for critical applications. The advanced coatings from Technetics Group allow you to improve your total cost of ownership, reduce lead-time and improve cycle life.
Details:
Coatings Capabilities
Thermal spray
CVD
PVD
Multiple booths
Multiple chambers
Auto shot peen
Heat-treating
Coatings Features
Porosity levels below 1%
High-bond tensile strength HVOF has a minimum bond tensile of 10,000 PSI
Surface temperatures exceeding 1000˚C
Application of dissimilar materials
Uniform and repeatable coating results (automated processing)
Resistant to abrasion wear
Enhanced erosion wear
Suitable for hard chrome replacement
For More Information: http://www.techneticsgroup.com/services/surface-coating/advanced-coatings/
Name: PLASTIFLEX Spring Energized Plastic Seals
Description: Technetics Group announces the introduction of a complete line of spring energized plastic seals for severe environments in Oil & Gas, Aerospace, Pharmaceutical, Industrial Valve applications.
Details:
Helical Spring Energized Plastic Seals
The helical spring configuration is ideal for corrosive chemical, high pressure, high temperature, and other environments when fluid sealing is critical.
V-Finger Spring Energized Plastic Seals
V-Finger spring energized plastic seals are used for dynamic seal applications when friction of the sealed joint must be controlled.
Advance Pitch Wire Spring Energized Plastic Seals
Advance pitch wire wound springs allow long spring travel to accommodate large changes in the seal gland cross section where the sealed joint motion is severe.
For more information: http://www.techneticsgroup.com/products/polymer-technologies/polymer-spring-energized-seal/
Name: CEFIL'AIR® Inflatable Seals
Description: CEFIL'AIR® seals, which are expanded and retracted by a pneumatic process, have been designed to meet these multiple applications.
Details:
CEFIL'AIR® seals, which are expanded and retracted by a pneumatic process, have been designed to meet these multiple applications. Within the scope of these types of seals, the CEFIL'AIR®, as a result of its patented design employing modern techniques and the most advanced elastomers, brings wider possibilities of use.
As they can satisfy the highest demands of temperatures from -100˚C to + 250/280˚C, as well as pressures from 10-1 to 10-3 mm Hg to several bar, in the presence of varied atmospheres or fluids, CEFIL'AIR® pneumatic seals can be used in all sectors of industry including advanced techniques and scientific research.
For more information: http://www.techneticsgroup.com/products/sealing-solutions/inflatable-seals/cefilair/
External Link
