Category:Production Engineering
Production engineering typically includes:
- Production monitoring and evaluation
- Asset management planning
- Workover design and execution
- Production equipment design
- Cost estimating and budgeting
- Interfacing with working interest partners, service companies and regulatory agencies
Subcategories
This category has the following 2 subcategories, out of 2 total.
P
Pages in category "Production Engineering"
The following 200 pages are in this category, out of 323 total.
(previous page) (next page)C
D
- Damage by Formation Fines Migration
- DeepReach Coiled Tubing Service
- Deepwater drilling - how does it work (video)
- Deepwater drilling 101 by Shell (video)
- Deepwater Horizon - What happened and why (video)
- Defoamer
- Description of Fluid and Species Transport
- Design and Analysis of a Flexible Jumper
- Design and Analysis of Rigid Jumpers
- Determination of Model Parameters and Diagnostic Charts
- Determination of the Formation Damage Potential by Laboratory Testing
- Determination of the Formation Damage Potential by Simulation
- Diagnostic Equations for Typical Cases
- Drag reducing agent
- Drawdown
- Drilling Mud Filtrate and Solids Invasion and Mudcake Formation
- Drilling Riser Analysis Methodology
- Drilling Riser Analysis Model
E
- Effect of Dissolution/Precipitation on Porosity and Permeability
- Electric submersible pump
- Electrical Power System
- Electrostatic treater
- Emulsion
- Enhanced oil recovery
- Environmental Impact Assessment
- Erosion
- Erosion corrosion
- Erosion Management
- Erosion Mechanisms
- Erosion threshold velocity
- Error Analysis: Propagation, Impact, Estimation
- Evaluation of Hydraulic Fracturing Fluids
- Evaluation of Workover Damage and Remedial Chemicals
- Expandable sand screen technology animation
- Experimental Set-up for Formation Damage Testing
F
- Fault Tree Analysis (FTA)
- Field Diagnosis and Measurement of Formation Damage
- Fishing operation via wireline (video)
- Flexible Risers
- Floating Drilling Equipment
- Flotation cell
- Flow assurance
- Flow Assurance and System Engineering
- Flow Assurance Challenges
- Fluid and Species Transport
- Forces Acting Upon Particles
- Formation Damage Control and Remediation
- Formation Damage Induced by Completion-Fluids and Crude-Oil Emulsions
- Formation damage simulator Development
- Fundamentals of oil exploration (video)
G
- Gas hydrate
- Gas lift
- Gas lift animation
- Gate valve bonnet failures from thermal expansion of fluids at high temperature
- Geochemical Model Assisted Analysis of Solid Mineral— Aqueus Phase Interactions and Construction of Charts
- Geochemical Modeling—Inverse and Forward
- Geochemical Phenomena—Classification, Formulation, Modeling, and Software
- Geophysics lecture 01: Introduction to Geophysics
- Geophysics lecture 02: Wave theory, refraction and reflection
- Geophysics lecture 03: Petroleum and its generation and migration
- Geophysics lecture 04: Reservoirs, trapping mechanisms, porosity
- Geophysics lecture 05: Electric (wireline) logs - spontaneous and resistivity logs
- Geophysics lecture 06: Electric (wireline) logs - Gamma ray logs
- Geophysics lecture 07: Well logging services (Interview with Jeff Keevan)
- Geophysics lecture 08: Electric (wireline) logs - Neutron and density porosity logs
- Geophysics lecture 09: Isopach maps and top of formation maps
- Geophysics lecture 10: Fence Post Diagrams
- Geophysics lecture 11: Introduction to Seismology
- Geophysics lecture 12: Seismic Stratigraphy
- Geophysics lecture 13: Sequence Startigraphy Part 1
- Geophysics lecture 14: Sequence Startigraphy Part 2
- Graphical Description of the Rock-Fluid Chemical Equilibria
- Graphical Representation of Clay Content
- Gravel pack completion (video)
- Guidelines and Program for Laboratory Formation Damage Testing
- Gun barrel settling tank
H
- High-Integrity Pressure Protection System (HIPPS)
- Horizontal drilling - Chesapeake Energy (video)
- Horizontal heater treater
- Hybrid Risers
- Hydrate Control Design Philosophies
- Hydrate Prevention
- Hydrate Remediation
- Hydraulic fracturing
- Hydraulic fracturing by Chesapeake
- Hydraulic Power System
- Hydrocarbon Flow
I
- Incompressive Cake Filtration
- Injectivity of the Waterflooding Wells
- Installation Analysis
- Installation and Workover Control System (IWOCS)
- Installation Positioning
- Installing subsea manifold - Total Dalia (video)
- Installing subsea suction anchor - Total Dalia (video)
- Installing subsea tree debris cap - Total Dalia (video)
- Installing subsea tubing hanger - Total Dalia (video)
- Installing subsea Xmas tree - Total Dalia (video)
- Instrumental and Laboratory Techniques for Characterization of Reservoir Rock
- Instrumental and Laboratory Techniques for Wettability
- Integration Test
- Interfaces
- Ion Exchange and Adsorption Reactions
J
L
M
- Massive Sand Production Model
- Mechanisms of the Heavy Organic Deposition
- Mineral Quantification
- Mineralogy and Mineral Sensitivity of Petroleum-Bearing Formations
- Model Assisted Analysis and Interpretation of Laboratory and Field Tests
- Model Considering the Clayey Formation Swelling and Indigeneous and External Particles
- Model Validation, Refinement, and Parameter Estimation
- Model-Assisted Estimation of Skin Factor
- Models Separating the Internal and External Filtration Processes
- Multi-Parameter Regression Models
- Multi-Phase and Species Systems in Porous Media
O
- Offshore platform (video)
- Offshore platforms for oil and gas production (documentary)
- Oil well
- Oil/gas production flowline and pipeline line sizing
- Oilfield scales
- Oilfield water analysis
- Openhole completion
- Ordinary Differential Equations
- Osmotic Repulsive Pressure
- Overview of deepwater drilling (animation video)
- Overview of Formation Damage
- Overview of Risk Management
P
- Partial Differential Equations
- Particle Deposition Rates
- Pay zone
- Permeability and Porosity Reduction by Swelling
- Permeability Relationships
- Petrography and Texture of Petroleum' Bearing Formations
- Petroleum engineering
- Petroleum foam
- Petroleum geology and exploration (video)
- Phase Behavior
- Pigging
- Pipeline Risk Based Inspection
- Plem Design and Analysis
- PLEM Design Methodology
- PLEM Foundation (Mudmat) Sizing and Design
- Plug and perf completion process (video)
- Plugging-Nonplugging Pathways Model for Asphaltene Deposition in Single-Phase
- Porosity and Permeability Relationships
- Pressure Surge or Water Hammer effect in single liquid phase flow
- Pressure-Flow Relationships
- Produced water
- Produced water treatment equipments
- Production casing
- Production chemistry
- Production Risers
- Project Execution
- Project Management and Engineering Costs
- Project Risk Management
- Proppant
- Pseudo-Damage Versus Formation Damage
R
- Radial Filter Cake Model
- Radial Filtration Formulation
- Rate Equations for Participate Processes in Porous Matrix
- Recovery of Thermodynamic Hydrate Inhibitors
- Reliability
- Remote-Operated Tool (ROT)
- Reservoir souring
- Riser Design Criteria
- Risk based inspection Output and Benefits
- ROV Intervention
- ROV System
S
- Sand control
- Sand erosion rate prediction
- Sand Management
- Scale Formation and Dissolution at the Pore Surface
- Scales
- Sedimentary Petrology 01: Overview and origin of sediment
- Sedimentary Petrology 02: Grain size parameters
- Sedimentary Petrology 03: Sedimentary rock classification - Part 1
- Sedimentary Petrology 04: Sedimentary rock classification - Part 2
- Sedimentary Petrology 05: Bedform development (Flume studies)
- Sensitivity Analysis—Stability and Conditionality
- Simplified Analytic Model for Asphaltene-Induced Formation Damage in Single-Phase
- Single-Phase Formation Damage by Fines Migration and Clay Swelling
- Slug Catcher Design
- Slugging and Liquid Handling
- Spill control and cleanup
- Stand-Alone Development
- Steam-assisted gravity drainage