Category:Production Engineering
Production engineering typically includes:
- Production monitoring and evaluation
- Asset management planning
- Workover design and execution
- Production equipment design
- Cost estimating and budgeting
- Interfacing with working interest partners, service companies and regulatory agencies
Subcategories
This category has the following 2 subcategories, out of 2 total.
P
Pages in category "Production Engineering"
The following 200 pages are in this category, out of 324 total.
(previous page) (next page)A
- A film explaining the process of petroleum exploration and discovery
- Acid stimulation
- ANCILLARY EQUIPMENT
- Animation of hydraulic fracturing (fracking) - Marathon
- Apparent viscosity
- Applications of the Ceriiansky and Siroky Model
- Applications of the Gruesbeck and Collins Model
- Applications of the Wojtanowicz et al. Model
- Artificial lift
- Artificial Lift Methods and Constraints
- Asphaltene and Wax Phase Behavior and Deposition Envelopes
- Asphaltene Control Design Philosophies
B
C
- Calculating The Penetration Rate
- Capillary Pressure and Relative Permeability
- Cementing subsea wellhead - Total Dalia (video)
- Challenges of HP/HT Pipelines In Deep Water
- Chapter 3: Petroleum exploration - Part 1
- Chapter 3: Petroleum exploration - Part 2
- Chapter 3: Petroleum exploration - Part 3
- Chapter 3: Petroleum exploration - Part 4
- Chapter 3: Petroleum exploration - Part 5
- Chapter 3: Petroleum exploration - Part 6
- Chapter 3: Petroleum exploration - Part 7
- Chapter 3: Petroleum exploration - Part 8
- Chapter 5: Reservoir performance - Part 1
- Chapter 5: Reservoir performance - Part 2
- Chapter 5: Reservoir performance - Part 3
- Chapter 5: Reservoir performance - Part 4
- Chapter 5: Reservoir performance - Part 5
- Chapter 6: Drilling - Part 1
- Chapter 6: Drilling - Part 2
- Chapter 6: Drilling - Part 3
- Chapter 6: Drilling - Part 4
- Chapter 6: Drilling - Part 5
- Chapter 6: Drilling - Part 6
- Chapter 7: Formation evaluation - Part 1
- Chapter 7: Formation evaluation - Part 2
- Chapter 7: Formation evaluation - Part 3
- Chapter 7: Formation evaluation - Part 4
- Chapter 8: Well completion - Part 1
- Chapter 8: Well completion - Part 2
- Chapter 8: Well completion - Part 3
- Chemical injection pumps for oilfield
- Coil tubing job walk through (video)
- Coiled Tubing Operations
- Colloidal Mobilization
- Composition and Properties of Hydrocarbons
- Compressive Cake Filtration Including Fines Invasion
- Continuous Real Time Series Analysis for Detection and Monitoring Formation Damage Effects
- Core Flood Tests
- Creating Rov interface Requirements
- Crystal Growth and Scale Formation in Porous Media
- Crystallization Kinetics
D
- Damage by Formation Fines Migration
- DeepReach Coiled Tubing Service
- Deepwater drilling - how does it work (video)
- Deepwater drilling 101 by Shell (video)
- Deepwater Horizon - What happened and why (video)
- Defoamer
- Description of Fluid and Species Transport
- Design and Analysis of a Flexible Jumper
- Design and Analysis of Rigid Jumpers
- Determination of Model Parameters and Diagnostic Charts
- Determination of the Formation Damage Potential by Laboratory Testing
- Determination of the Formation Damage Potential by Simulation
- Diagnostic Equations for Typical Cases
- Drag reducing agent
- Drawdown
- Drilling Mud Filtrate and Solids Invasion and Mudcake Formation
- Drilling Riser Analysis Methodology
- Drilling Riser Analysis Model
E
- Effect of Dissolution/Precipitation on Porosity and Permeability
- Electric submersible pump
- Electrical Power System
- Electrostatic treater
- Emulsion
- Enhanced oil recovery
- Environmental Impact Assessment
- Erosion
- Erosion corrosion
- Erosion Management
- Erosion Mechanisms
- Erosion threshold velocity
- Error Analysis: Propagation, Impact, Estimation
- Evaluation of Hydraulic Fracturing Fluids
- Evaluation of Workover Damage and Remedial Chemicals
- Expandable sand screen technology animation
- Experimental Set-up for Formation Damage Testing
F
- Fault Tree Analysis (FTA)
- Field Diagnosis and Measurement of Formation Damage
- Fishing operation via wireline (video)
- Flexible Risers
- Floating Drilling Equipment
- Flotation cell
- Flow assurance
- Flow Assurance and System Engineering
- Flow Assurance Challenges
- Fluid and Species Transport
- Forces Acting Upon Particles
- Formation Damage Control and Remediation
- Formation Damage Induced by Completion-Fluids and Crude-Oil Emulsions
- Formation damage simulator Development
- Fundamentals of oil exploration (video)
G
- Gas hydrate
- Gas lift
- Gas lift animation
- Gate valve bonnet failures from thermal expansion of fluids at high temperature
- Geochemical Model Assisted Analysis of Solid Mineral— Aqueus Phase Interactions and Construction of Charts
- Geochemical Modeling—Inverse and Forward
- Geochemical Phenomena—Classification, Formulation, Modeling, and Software
- Geophysics lecture 01: Introduction to Geophysics
- Geophysics lecture 02: Wave theory, refraction and reflection
- Geophysics lecture 03: Petroleum and its generation and migration
- Geophysics lecture 04: Reservoirs, trapping mechanisms, porosity
- Geophysics lecture 05: Electric (wireline) logs - spontaneous and resistivity logs
- Geophysics lecture 06: Electric (wireline) logs - Gamma ray logs
- Geophysics lecture 07: Well logging services (Interview with Jeff Keevan)
- Geophysics lecture 08: Electric (wireline) logs - Neutron and density porosity logs
- Geophysics lecture 09: Isopach maps and top of formation maps
- Geophysics lecture 10: Fence Post Diagrams
- Geophysics lecture 11: Introduction to Seismology
- Geophysics lecture 12: Seismic Stratigraphy
- Geophysics lecture 13: Sequence Startigraphy Part 1
- Geophysics lecture 14: Sequence Startigraphy Part 2
- Graphical Description of the Rock-Fluid Chemical Equilibria
- Graphical Representation of Clay Content
- Gravel pack completion (video)
- Guidelines and Program for Laboratory Formation Damage Testing
- Gun barrel settling tank
H
- High-Integrity Pressure Protection System (HIPPS)
- Horizontal drilling - Chesapeake Energy (video)
- Horizontal heater treater
- Hybrid Risers
- Hydrate Control Design Philosophies
- Hydrate Prevention
- Hydrate Remediation
- Hydraulic fracturing
- Hydraulic fracturing by Chesapeake
- Hydraulic Power System
- Hydrocarbon Flow
I
- Incompressive Cake Filtration
- Injectivity of the Waterflooding Wells
- Installation Analysis
- Installation and Workover Control System (IWOCS)
- Installation Positioning
- Installing subsea manifold - Total Dalia (video)
- Installing subsea suction anchor - Total Dalia (video)
- Installing subsea tree debris cap - Total Dalia (video)
- Installing subsea tubing hanger - Total Dalia (video)
- Installing subsea Xmas tree - Total Dalia (video)
- Instrumental and Laboratory Techniques for Characterization of Reservoir Rock
- Instrumental and Laboratory Techniques for Wettability
- Integration Test
- Interfaces
- Ion Exchange and Adsorption Reactions
J
L
M
- Massive Sand Production Model
- Mechanisms of the Heavy Organic Deposition
- Mineral Quantification
- Mineralogy and Mineral Sensitivity of Petroleum-Bearing Formations
- Model Assisted Analysis and Interpretation of Laboratory and Field Tests
- Model Considering the Clayey Formation Swelling and Indigeneous and External Particles
- Model Validation, Refinement, and Parameter Estimation
- Model-Assisted Estimation of Skin Factor
- Models Separating the Internal and External Filtration Processes
- Multi-Parameter Regression Models
- Multi-Phase and Species Systems in Porous Media
O
- Offshore platform (video)
- Offshore platforms for oil and gas production (documentary)
- Oil well
- Oil/gas production flowline and pipeline line sizing
- Oilfield scales
- Oilfield water analysis
- Openhole completion
- Ordinary Differential Equations
- Osmotic Repulsive Pressure
- Overview of deepwater drilling (animation video)
- Overview of Formation Damage
- Overview of Risk Management
